|
Dynojet Ignition Module - Honda CBR600RR
The Dynojet Ignition Module can be added to select Power Commander III USB's and is connected to the PCIIIUSB via a built in expansion port link. It is connected to the ignition coils at
either an intermediate harness or directly to the coil connectors. No cutting or splicing is required.
The Dynojet Ignition Module uses direct coil driver technology and allows a high degree of
timing adjustment. Not only can the user advance or retard the ignition curve based on a combination of throttle position and rpm, but now each cylinder can be tuned individually. In addition, it features "Rev X-tend". The rev limit of the engine can now be increased without the need to make any modifications to the bikes' ECU.
- Allows the user to advance or retard the ignition curve based on throttle position and rpm, and to tune each cylinder individually.
- Ignition module connects to PCIII USB via a built-in expansion port link.
- Connects to the ignition coils through an intermediate harness connection or directly to the coil connectors: no cutting or splicing of wires is required.
- Direct coil driver technology allows a high degree of flexibility in timing adjustments
|