The Power Commander III was introduced in 2000 and is externally similar to the PCII. The PCIII utilizes "direct injector control" technology to control the fuel curve for models that do not possess the appropriate sensors to allow sufficient fuel adjustment using the PCII technology. The PCIII takes the injector pulse from the ECU and changes the pulse width signal to the injectors.This unit allows "Fuel Only" adjustment.
The PC is a fuel injection and ignition timing (on some models) adjustment unit that plugs "inline" with the bikes' stock ECU. The PC uses original equipment style connectors so that no splicing or cutting of the harness is required. Most installations take less than 15 minutes, some as little as 5 minutes. Changes are made to the bikes fuel and ignition curves via the PC's onboard microprocessor.
Using this technology we are able to offer a large area of adjustment without making any permanent changes to the bikes' ECU (electronic control unit). Removing the PC returns the bike to its previous stock condition. The Power Commander can be ordered preprogrammed with a your choice of several settings, based on the modifications to your bike. The unit also comes complete with software and cable link that allows you to change between different maps or make adjustments to a map file.
There are currently no reviews for this item. Would you like to write one?
