Galfer Brake Pads - Ducati 996R

Galfer 1054 Semi-Metallic Carbon Compound:

• Can be used for sport, touring and commuting applications.
• Works well in wet conditions as well as in cold brake conditions.
• Withstands abrupt temperature changes allowing for a quick feel return.

Galfer Advance Ceramic Full Metallic HH Compound:

• Will withstand friction ratings of 0.7u and does not require any heat to deliver friction.
• Advanced ceramic technology allows for pads to "cool off" as soon as pressure is released from the brake lever.
• Requires very little brake pressure effort under repeated braking.
• Recommended to those looking for the "edge" or "ultimate" stopping feel and control.

NOTE: All Galfer brake pads must be properly "BEDDED-IN" to achieve maximum output and reduce unnecessary rotor wear.

Galfer strongly recommends following these BED-IN directions:

• Clean the brake rotor(s) with thin sand paper and water prior to new pad installation.
• Towel dry the rotor surface after sanding.
• Install the new pads and be easy with the brakes for the next 40-50 miles.