Pros: They look awesome . . . no more dirty steel screws. Now my front of my bike looks even better, because I like to take it to bike nights B-)
Cons: None
Did you find this review helpful?
By Anonymous from Anytown, USA on 04/02/2008
Pros: The blue finish on the screws is aesthetically pleasing and they came with many clear washers to keep the metal screws from scratching. Much more quality than my stock wellnut set, which were nylon screws that stripped and broke.
Cons: The wellnuts were bigger than my stock ones, so it was a tight squeeze trying to fit them on my bike. Otherwise, there was no problem.
1 of 1 people found this review helpful.
Did you find this review helpful?
Keiti windscreen kit, black
By Anonymous from Buffalo, NY on 03/06/2008
Pros: Well nuts work as advertised
Cons: The screws' paint is too thick, I couldn't find an allen wrench to fit the heads, either it was to loose and wouldn't catch or it was too big and you had too force the wrench into the allen head resulting in a scratched up screw. Defeats the purpose if your going for the same color look on your bike, to have black screws with a bunch of silver scratches showing. Unfortunately I needed the wellnuts for the new windscreen, so I couldn't send it back, I'm currently waiting on a new set of screws from pro-bolt.
Comments: KneeDraggers Commnents: sounds like you need a new set of allen wrenchs! I'm sure these are metric sized.
Did you find this review helpful?
Keiti Windscreen Screw Kit
By Anonymous from Anytown, USA on 12/24/2007
Pros: The screws look nicer than the stock phillips head screws that hold the windscreen in place.
Cons: Overall the screw kit is of poor quality. The plastic caps that hold the nut that is part of the screw assembly are poorly constructed compared to the stock part. Using the washer on the top of the faring is good to protect the paint, but if you use it on the inside of the faring, there is not enough thread on the screw exposed to capture the nut. Also the nuts will come right out of the plastic cap housing if you tighten to much. The factory part are fused more completely. I used the factory parts on the inside top four screw holes. The last two you have to get on with needle nose pliers and by feel , unless you want to completely dismantle the speedometer assembly.
0 of 1 people found this review helpful.
Did you find this review helpful?
Silver Kit
By Nicholas from Memphis TN on 09/24/2007
Pros: Silver kit looks great on the black R1, and is a fantastic alternative to the boring black stock bolts. Kit comes with a BUNCH of extra's as well, which is way cool.
Cons: You have to watch out for the rubber clear washers, since they can get stuck together, thus making install take a minute longer once you figure out you have 2 washers on there, and that is why the bolt won't thread :)
Not necessarily a con, but more of a callout
1 of 1 people found this review helpful.
