Cons: However, it is not machined from billet aluminum, it is clearly a cast product. There are some bubbles in the casting that are especially visible where the flat surface was machined. Not a high-quality machined finish, but it seals up just fine. The cover is a bit thicker than stock, so you will need one longer screw. I replaced the shortest screw that would no longer reach the threads with a 6x25, but a 6x20 will also work. Good idea to have one handy before you do the job.
Item will take about a week to reach you, as it ships from NRC in Canada, to Kneedraggers' Delaware warehouse, then to you. I ended up welding my cracked stock cover at a friends' shop because I couldn't keep waiting. Swapped with the new cover when it came.
Did you find this review helpful?
Average Customer Rating:4.0 out of 5 (based on 1 rating)
Cons: However, it is not machined from billet aluminum, it is clearly a cast product. There are some bubbles in the casting that are especially visible where the flat surface was machined. Not a high-quality machined finish, but it seals up just fine. The cover is a bit thicker than stock, so you will need one longer screw. I replaced the shortest screw that would no longer reach the threads with a 6x25, but a 6x20 will also work. Good idea to have one handy before you do the job.
Comments: Item will take about a week to reach you, as it ships from NRC in Canada, to Kneedraggers' Delaware warehouse, then to you. I ended up welding my cracked stock cover at a friends' shop because I... (Read the rest of this review)
NOTICE! Please Read The Following Important Product Notes:
