Signal Dynamics Lighting Control Tri-Star Module (with Load Equalizer)

Signal Dynamics Lighting Control Tri-Star Module (with Load Equalizer)

The Tri-Star module converts the rear turn signal lights to function as brake and turn signal lights. When the brakes are applies, the turn signal lights illuminate. If a turn signal is applied, it has priority over the brake light function on the side that is selected. If the turn signal is canceled and the brakes are still applied, the brake light function of the turn signal lights illuminate steady on.

Features:

• Adds brake light function to existing turn signals
• Dependable Solid-state electronic components.
• Weather Proof - potted with soft cell technology to prevent wire chaffing and damage.

Specification:

• Voltage: 12 VDC, Negative Ground.
• Max Load Capacity: 6 amps per left or right channel.
• Dimension: 2 1/4" L x 1 5/8" W x 5/8" H
• Mounting: Secure to flat surface with double sided VHB tape (included).

Tri-Star Function Check

Applying the brakes will cause the rear Turn Signals to light as long as the brakes are held. If a turn signal is sent to the rear lights at the same time it will have priority over the brake lights and cause the corresponding light to flash. When the turn signal is canceled the brake light will resume.