Woodcraft Solo Operation Front Stand w/ Pin

Click Images For Larger View

Average Customer Rating: 5.0 out of 5 (based on 6 ratings)

NOTICE! Please Read The Following Important Product Notes:

• Please select the pin size for your bike based on the chart below.

Woodcraft solo-operation front stands for virtually any model! The design incorporates a "pin" which slide into the bottom of the steering head to lift the bike with no pressure on the forks. This is GREAT for doing front-end work, removing forks, removing front wheel, using tire warmers, etc. The pins come in a variety of sizes, be sure to specify which make/model of bike you have so that the pin can be ordered in the correct size. If you have multiple bikes, additional pins can be ordered as well so that you can use the stand with all of your bikes!

Stainless Steel skids on the stands bottom - slide easy and keeps our stands looking good.
Quick-removal front stand pins, a Woodcraft original.
Adjustable height upper sanction allows use on all bikes from a RS125 to a ZX12.

Additional Pin for Woodcraft solo front stand. This option allows the inclusion of multiple pin sizes with the purchase of a Woodcraft front stand to use the stand with multiple bikes.

Woodcraft Solo Operation Front Stand Pin Application Chart:

Aprilia
RS250	16.5mm pin
Mille	27mm pin
Falco	27mm pin
Factory R	19mm pin
Tuono	27mm pin

Buell
Lightning	18mm pin
Thunderbolt	18mm pin
Blast	18mm pin
Cyclone	18mm pin
Firebolt	18mm pin

Ducati
750/900SS	17mm pin
Monster	17mm pin
ST2/ST4	27mm pin
748/916/996	N/A
750/950SS/888	18mm pin
749	13mm pin

Honda
RS125	13mm pin
RS125	13mm pin
RS250	24mm pin
VTR250/1000	24mm pin
CBR600F3 (must remove ram air intake)	24mm pin
CBR600F4/F4i	24mm pin
CBR600RR	20mm pin
CBR600RR	20mm pin
Hawk 650	24mm pin
VFR750/800	24mm pin
CBR900RR (93-97)	24mm pin
CBR900RR (98-99)	13mm pin
CBR929/954	13mm pin
Superhawk	24mm pin
RC51	13mm pin
RC51 (02+)	27mm pin
CBR1000RR	13mm pin

Kawasaki
EX250	19mm pin
EX500 (87-93)	19mm pin
EX500 (94+)	20mm pin
ZX6E (93+)	21mm pin
ZX6R (95-97)	13mm pin
ZX7R (91+)	27mm pin
ZX6RR/ZX6R (03+)	15mm pin
ZX9R (94-97)	27mm pin
ZX9R (98+)	15mm pin
ZX10R (04)	17mm pin
ZX12R	13mm pin
Z1000 (03-04)	27mm pin

Suzuki
Bandit 400/600/1200	19mm pin
GS500	24mm pin
GSXR600 (97-03)	13mm pin
GSXR750 (91-95)	24mm pin
GSXR750 (96-04)	13mm pin
GSXR1000 (01-02)	13mm pin
GSXR1000 (03-04)	17mm pin
GSXR1000 (05-06)	13mm pin
GSXR1100	24mm pin
Hayabusa (requires removal of fairing)	13mm pin
RF600/900R	24mm pin
SV650S (99-02)	21mm pin
SV650S (03-04)	16.5mm pin
TL1000S/R (requires removal of fairing)	13mm pin

Yamaha
TZ125/250	13mm pin
RZ350/500	19mm pin
FZR 400/600/1000	21mm pin
SecaII	19mm pin
R6 (01-04)	16.5mm pin
YZF750	20mm pin
R1	16.5mm pin
FZ1	20mm pin
FJ1200	19mm pin

Most Recent Review:

view all reviews (5) | write a review

Woodcraft Solo Operation Front Stand w/ Pin

By Meade from West Chester, PA

Pros: Adjustable stand works great when using full length of cap extenders. Black finish is hard to chip or scratch up. Pin has rubber o-ring to keep in place, no worries about being stuck in triple tree on track. All the cool guys are using them too.

Cons: Colors would be cool, but you can always dress it up with sponsors logo stickers.

Sure other companies will say they have the best stuff, but this stand is the best stuff. Strong materials will not bend like cheaper stands. The price is reasonable for a top notch, light weight, adjustable and efficient stand. Also it has the larger wheels to allow smooth use on sandy/gravel paddocks.

2 of 2 people found this review helpful.

Did you find this review helpful?

Average Customer Rating: 5.0 out of 5 (based on 6 ratings)

Reviewed By 5 Customers:

view all reviews (5) | write a review

Woodcraft Solo Operation Front Stand w/ Pin

By Meade from West Chester, PA

Pros: Adjustable stand works great when using full length of cap extenders. Black finish is hard to chip or scratch up. Pin has rubber o-ring to keep in place, no worries about being stuck in triple tree on track. All the cool guys are using them too.

Cons: Colors would be cool, but you can always dress it up with sponsors logo stickers.

Comments: Sure other companies will say they have the best stuff, but this stand is the best stuff. Strong materials will not bend like cheaper stands. The price is reasonable for a top notch, light weight,... (Read the rest of this review)

2 of 2 people found this review helpful.

Did you find this review helpful?

By Anonymous from Anytown, USA

Pros: great stand. Much easier to use/ lift than most other stands.

2 of 2 people found this review helpful.

Did you find this review helpful?

By Anonymous from Alaska

Pros: heavy duty and large wheels makes it easy to use especially where i live. great product. purchased both the front and rear, could not be any happier.

Cons: the fact that it may scratch the front if you forget to put a cloth..

1 of 1 people found this review helpful.

Did you find this review helpful?

By John from Anytown, USA

Pros: Stand works Great. Woodcraft list the exact size of the pin needed for every model bike.

Cons: none

1 of 1 people found this review helpful.

Did you find this review helpful?

By Zach Street from Springfield, IL

Pros: Absolutely awesome stand!! Incredibly easy to use. The huge 4" wheels will roll over most anything.

1 of 1 people found this review helpful.

Did you find this review helpful?